Does the LR80R have any standby current?
The standby current of the LR80R is less than 100µA.
Can I change the battery in the Fenix LR80R?
The Fenix LR80R is a built-in battery and cannot be removed. It uses a 7.2V/12000mAh li-ion battery pack that can be charged through the flashlight using the USB-C charging port.
How do you charge and discharge the LR80R?
The LR80R is rechargeable and also features the ability to charge other devices from it.
To charge the flashlight, plug a USB-C charging cable into the USB-C sized port on the flashlight.
To charge other devices from the LR80R, plug a charging cable into the USB-A sized port of the flashlight. The LR80R only supports discharging to Micro-USB and Type-C USB devices. Apple devices charging via Lightning cable are not supported.
Please note that Fenix cannot guarantee that all devices will be compatible with the LR80R discharge feature.
What is the beam angle of the LR80R?
The LR80R features a two-part beam with a center hot spot and wider flood ring. The hot spot beam angle is 9° and a flood ring beam angle is 58°.
What batteries can be used in the LR80R?
The LR80R flashlight can only use the built-in battery pack that is included with the flashlight.
How does the LR80R proximity sensor work?
The proximity sensor will protect the light from damaging itself if it ever is accidentally left on while close to a surface.
Be aware that this may result in automatic step-down in some areas with particularly reflective surfaces, or in rain or other wet environments.
Does the LR80R feature overheat protection?
Yes, the light will reach high temperatures, especially on the brighter output levels. If the light reaches a temperature of 140° F (60° C) it will drop from high output levels and prevent you from reaching them again. Once the light has cooled below this point you will have access to all brightness levels again.
