The First USB type C rechargeable bicycle tail light has arrived at Fenix Store. The all new Fenix BC05 is ultra compact with an eye-catching red light that delivers a whopping 10 Lumens! The bright LED can be seen at a distance of 200 meters or 656 ft. The amazing bike light is extremely versatile; with the use of the included body clip, the light can be buckled on a backpack or worn on your waist or chest as a warning light. With all new USB type C charging, a full charge only takes 1.5 hours and lasts up to 72 hrs. on the flash mode. With the light switched off, single click of the switch allows for easily checking the battery-level.
- Compact Size
- Output Levels:
- High - 10 lumens/1.8 hours
- Low - 2 lumens/10 hours
- Flash (slow) - 2 lumens/40 hours
- Flash (fast) - 2 lumens/72 hours
- USB Type-C Charging
- 2 Inches in Length
- Battery Level Indication
- Low-voltage warning
- 4 Output levels
- Single switch operation for fast and easy use
- Built in 240mAH Li-polymer battery
- IP66 Waterproof Rating
- Built-in 240mAH Li-polymer battery
- BC05R Bicycle Tail Light
- USB Type-C Charging Cable
- Bicycle Mounting Strap
- Body Clip
- User Manual
- Warranty Card
Download PDF Here
Operating Instructions ①
Press and hold for 0.5 seconds to turn on/off.
With the light switched on, single click the switch to cycle through Low→Flash (Slow)→Flash
Operation: Remove the dust cover of the bicycle tail light to reveal the charging port, and plug
the Type-C end of the charging cable into the light’s charging port, then connect the other end of
the charging cable to a USB power adapter.
Charging Indicator: The switch will display charging status. Red light will remain constant on in
charging process, green light will remain constant on when the battery is fully charged.
Battery Level Indication ③
With the light switched off, a single click of the switch to check the battery status. The battery
level indicator will display the battery status for 3 seconds.
Green constant on: saturated (100% - 71%)
Orange constant on: sufficient (70% - 41%)
Red constant on: poor (40% - 11%)
Red flashes: critical (10% - 1%)
When the voltage level drops below the preset level, the battery level indicator blinks red
to remind you to recharge the battery. To ensure normal use, the light will not turn off
automatically and will work till the battery level runs out.
Mounting Instruction ④
Mounting strap: First loop the mounting strap (without LOGO) around the small opening of the
tail light, and place the tail light on the seat post (face up), then loop the other end of the
mounting strap (with LOGO) around the other small opening of the tail light, adjust as the size of
the seat post.
Body clip: Keep the body clip and the tail light both face up, push the small opening on both
sides of the tail light downward to the spout of the body clip.
Note: The bicycle light is applicable to bike seat post diameters between 20mm-35mm.
Usage and Maintenance
- Recharge the light timely when the battery level is critical, for future use.
- Recharge a stored light every three months to maintain optimal battery performance.
- Disassembling the sealed head can cause damage to the light and will void the warranty.
Included in the package
BC05R Bicycle tail light, Bicycle mounting strap, Body clip, Type-C charging cable, User manual,
This light is a high-intensity lighting device capable of causing severe eye damage. Avoid shining
the light directly into anyone’s eyes.