Name: Fenix PD32 V2.0 LED Flashlight - Discontinued
Brand: Fenix
SKU: FX-PD32V2
Price: 64.95 USD
Availability: OutOfStock

Showing the multifunctional tail switch of the Fenix PD32 V2

Showing the major features of the Fenix PD32 V2

Showing the beam distance and flood of the Fenix PD32 V2

Fenix PD32 V2 features 3 brightness levels to meet your needs

Fenix PD32 V2 can tail stand to become a lantern

Additional accessories can enhance the Fenix PD32 V2's tactical features

Fenix PD32 V2's pocket clip being used in various ways

Fenix PD32 V2 being dropped to display its impact resistance

Fenix PD32 V2 in extreme environments to show its resistance to cold and heat

Fenix PD32 V2 under water to display its IP68 waterproof standards

Chart showing Fenix PD32 V2 outputs and runtimes

All the items that come with the Fenix PD32 V2

Fenix PD32 V2 seen from an angle behind the tail cap switch

$64.95

Shipping calculated at checkout.

Quantity

In stock, ready to ship
Inventory on the way

Satisfaction guaranteed

Free shipping for orders over $25

Backed by the Fenix Limited Lifetime Warranty

This light has been discontinued. Please see the PD32R for the latest version.

The Fenix PD32 V2.0 features a powerful OSRAM KW CSLPM1.TG LED, granting it a strong 1200 lumen output. It also boasts a single-switch dual-layered design, tail-stand capability, and is powered by a single 18650 battery (not included). To use, simply full press to activate/deactivate, tap to cycle through three output modes, and hard press for .5 seconds to enable the strobe mode. This flashlight is a great choice for a duty light or just to keep in the home for personal use.

Outputs

High: 1200 Lumens, 2.67 hours, 1295 ft
Mid: 350 Lumens, 5.33 hours, 715 ft
Low: 30 Lumens, 82 hours, 180 ft
Strobe: 1200 Lumens

Details

OSRAM KW CSLPM1.TG LED with a lifespan of 50,000 hours
Intelligent Overheat Protection
Low voltage warning
Single rear dual-layer switch operation
18650 Battery compatible
IP68 Waterproof Rating: Fully submersible to 6.5 feet for 30 minutes
Three output levels
Compact Size
Practical Tail Standing Capability
Tough Aluminum body

Batteries

Recommended: Fenix Lithium-ion Rechargeable 18650 batteries
Not Recommended: Non-rechargeable CR123A batteries
*Batteries Not Included*

Size

Length: 5.09 inches
Diameter: 1.0 inches
Weight: 2.89 oz Excluding battery

Fenix PD32 V2 LED Flashlight
Holster
Lanyard
Spare O-Ring
PD32 V2 User Manual
Warranty Card

What batteries work in the Fenix PD32 V2 edc flashlight?

The PD32 V2 is compatible with a single 18650 lithium-ion battery or two CR123 lithium batteries. 18650 batteries with built-in USB ports are not recommended.

What is the beam angle of the PD32 V2?

The PD32 V2 features a two-part beam with a center hot spot and wider flood ring. The hot spot beam angle is 6.8° and the flood ring beam angle is 62°

Fenix PD32 V2

Overall rating: 4.7849464 / 5 from 93 reviews.

AI Generated Review Summary

The Fenix PD32 V2.0 LED Flashlight, now discontinued, was highly praised for its powerful 1200 lumen output, easy-to-use settings, and impressive beam. Customers appreciated its perfect size and the quality of its light. However, opinions on the battery life varied, and it is recommended to check the latest version, the PD32R.

Summary topics

Tailcap Switch: 11%
Output Settings: 7%
Light Beam: 10%
Product Size: 6%
Light Quality: 44%

Review topics: [].

Review highlights

"Great Light, strong Beam you an Throw it around and it still works great" — Clint B.
"The single tail switch is great and tail standing is nice bonus." — Joe J.
"Easy to switch modes quickly." — Madison C.

Reviews

Great flashlight!

"Love the design of this! Easy to switch modes quickly. Would definitely recommend!"

— Madison C. (5/5)

Discontinued. Why?

"Great flashlight company. My PD32 is now discontinued. Must be a bad ass upgrade because this is a nice light."

— scott j. (5/5)

Simple operation, good quality light.

"Simple operation, good quality light. Pretty focused hotspot with some spill on the sides. I put a double sided pocket clip on mine that I had laying around."

— VL (5/5)

Excelente

"Calidad y precio en un excelente producto, recomendado al 1000%"

— Hernan G. (5/5)

Great EDC light

"I bought this light to use for EDC and as my work light. I am a firefighter and use flashlights at work quite often for night time calls. This light puts out a ton of light and all 3 modes work flawlessly. Only reason it’s not 5 stars is because it gets hot and it gets hot quick. With in less than a minute of use this light gets very warm. Other than that it’s a great light. Fits great in pocket"

— Vincent S. (4/5)

Excellent Light

"Excellent little light. Exactly what I needed. Lets me see all the nooks and crannies of a home as I inspect."

— Artie O. (5/5)

Like this version

"I kike the V2.0 update with the brightness levels controlled by the tail switch. It's more convenient and easier to use at night. I gave my original PD32 to my grandson."

— Robert A. (5/5)

Quick shipping

"Best light ever. The only problem I've had is the pocket clip came off and lost it."

— Thomas L. (5/5)

Close to the perfect EDC flashlight

"The close to perfect EDC flashlight. 30 lumens is great for reading in the dark, 350 lumens is great for walking, 1,200 lumens is great for lighting things up at a distance. Better heat dissipation is what it needs. It can get really hot at 1,200 lumens"

— Tony S. (5/5)

Almost a perfect edc light.

"This is in my opinion, Fenix's best light, because of its simple UI, size, and beam. Improvements I'd like to see, it's a forward clicky switch, although the electronic switch isn't bad. The more important improvement, would be the dual contact springs, one on the driver,as well as the switch. If you can make it durable enough to compete with modlite, it'll be unmatched at this price. Please make more lights with the single tail switch UI, this should be your standard setup."

— Diesel (4/5)

Q&A

More Information

Fenix PD32 V2 Everyday Carry Flashlight

When it comes to everyday carry flashlights, you want something small, easy to use, and durable. Fenix is answering that call and exceeding expectations with their recent upgrade, the Fenix PD32 V2. Not only is this flashlight compact, but it packs a punch with its output and has impressive features perfect for EDC.

Perfect for all EDC Needs

So what can you expect of this new upgraded Fenix light? Well first let's cover the size. The PD32 V2 is just barely over 5 inches in length and with its included pocket clip, it's a simple light for everyday carry. If you don't like the pocket clip though, you can always remove it which is a nice touch.

This Fenix light is easy to operate, features enough brightness levels to make it versatile, and is extremely durable. Not to mention that it also has the ability to tail stand, an absolutely excellent feature for any everyday carry flashlight. If you need to work on something with both hands and you need light, just tail-stand the PD32 V2 up and use it as a lantern. For such a small light, it has a lot going for it.

Small Powerful Flashlight

The Fenix PD32 V2 delivers 1200 lumens, very impressive for an everyday carry flashlight. Its predecessor, the PD32, delivers 900 lumens so we're seeing quite an upgrade with this new version. With its single tail switch, the PD32 V2 is so easy to operate. It even comes with a strobe mode that just requires you to hold the tail switch down for about half a second. So if you absolutely need to use it for self-defense, it's there for you.

As we mentioned before, this flashlight features a few outputs: high - 1200 lumens, medium - 350 lumens, and low - 30 lumens. These are enough brightness levels that this EDC light can be used in multiple situations. Whether you need a small amount of light for an up-close task or a lot of light to scout an area, the PD32 V2 has you covered.

Next, let's take a look at what battery the PD32 V2 uses. You have a couple options with the power source. The PD32 is able to run on one 18650 battery. With 18650 flashlights you get higher outputs and often longer run times.

The PD32 V2 features an impressive maximum runtime of 82 hours. With this long runtime, you can expect this flashlight will last a while before you need to charge or switch out the battery. The last thing we want to touch on with this light is it's durability. With Fenix you can expect high quality and long-lasting flashlights. The PD32 V2 is crafted from a tough aluminum and has a high waterproof rating of IP68. Basically, as long as you don't go swimming with your flashlight, you should be fine. The PD32 V2 exceeds expectations with its durability. As experts in the field of outdoor lighting technology, Fenix knows what people want in their flashlights and they deliver. The PD32 V2 is a top-notch everyday carry flashlight that will quickly become your go-to flashlight. Make sure to pre-order the Fenix PD32V2 EDC flashlight today.